We make scuba diving gears for your great diving life

B.C.Jacket

Combination valve II

Inflation/deflation is possible without making any major change in posture.

You can adjust buoyance without raising an arm or the body, or making any other major change in posture underwater. Oral inflation is also possible.

Combination valve II

2-way inflator

You can set the inflator in one of the following two arrangements.
*Compatible with combination valve II

Standard position

Standard position

Compatible also with conventional deflation technique and style. Even beginners can use it just naturally. A remote inflation / deflation system can adjust buoyancy while maintaining a balance underwater.

Back position

Back position

You can take the inflator hose over your left shoulder to your back and set the remote part in the left pocket. This arrangement is excellent to facilitate your movements because the accordion hose will not be in the shoulder belt, ma k in g u n d e r w a t e r c ame r a s h o o t in g a n d o t h e r underwater activities easier. Operating the remote is easier also, as it is kept in one position; divers with stiff bones will also prefer this, as they will not need to fold and stretch out arms widely.

Characteristics

Ultra-thin full harness(JX, JA)

The full harness firmly holds the tank without rattling. The ultra-thin design minimizes the distance between the tank and the diver's back, holding it closely onto the back.

Shoulder belt like a mountain climbing backpack(JX,JA )

Our thorough research on mountain climbing backpacks ' technologies realized the length, thickness, cushioning, curve line and chest belt position ideal for diving.

Back pad(JX.JA)

To maximize the benefit of our new full harness and shoulder belt, we further integrated the harness with the shoulder by renewing the back pad shape and design. Also, to alleviate load on the waist depending on the body shape, cushioning in the back pad can be adjusted by the user to suit the individual waist curve.

Back pad(JX.JA)

Long tank buckle(JA, JX)

Long tank buckle(JA, JX)
Long tank buckle(JA, JX)

Setting is easy for w omen and senior divers.

Flexible shoulder belt(JA, JS)

Swivel D rings always keep the B.C. fit to your body.

420&420(JS)

420 denier Nylon is used for the front and inside.

840&840(JX,JA )

Uses high-strength 66 Nylon (840 denier) with high durability and weather resistance.

Waist curve line(JA, JX)

The sides are cut to fit the waist curve to realize comfortable wearing experience.

D-ring in the side pocket(JA, JX)

D-ring in the side pocket(JA, JX)

D-rings are provided in each side pocket to hook accessories such as slates.

Cummer belt key pocket(JA, JX)

Cummer belt key pocket(JA, JX)

A handy key pocket is provided in the front part of cummer belt.

Line up

Quick release side pockets

Quick releasable weight pockets on both sides are attached in an emergency. Each pocket can carry up to 2 kg of weight.

Quick release
side pockets

Combination valve II

Inflation/deflation is possible without raising a hand, by operating buttons at hand. Also oral inflation is of course possible as before.

Combination valve II

Direct belt system & slide float

Direct belt system & slide float

The independence of the belt from the float alleviates pressure on the diver's body when B.C. is inflated.

Separate shoulder system

Because the shoulder belt is separated from t he t op e nd o f t he fl oat, y ou f eel smaller pressure caused onto your body when B.C. is inflated. Thanks to the design again, the shoulder belt always fits your body perfectly.

Separate shoulder system

D-rings will be helpful in many different arrangements.

Equipped with 19 D-rings useful for carrying small items such as underwater notebook. Use it for your own diving style.

-rings will be helpful
in many different
arrangements.

Detachable pocket

Two detachable pockets are provided, for classifying spare belts etc.

Detachable
pocket

Front tightness adjuster

Now a stretch cord ties the side belt to the inside o f t he p ocket. You c an a djust t he stretch cord length to tighten or loosen the up - down shift of the front part of B.C .(pocket).

Front tightness adjuster

Wide detachable pocket:

can be attached to the right pocket.

Wide detachable
pocket:

Direct belt system & slide float

Direct belt system & slide float

The independence of the belt from the float alleviates pressure on the diver's body when B.C. is inflated.

Separate shoulder system

Because the shoulder belt is separated from the top end of the float, you f eel smaller pressure caused onto your body when B.C. is inflated. Thanks to the design again, the shoulder belt always fits your body perfectly.

Separate shoulder system

Combination valve II

Inflation/deflation is possible without raising a hand , by operating buttons at hand. Also oral inflation is of course possible as before.

Combination
valve II

Standard inflator valve

Standard inflator with a pull dump feature.

Standard inflator
valve

OCT2

Combines an inflator and octopus in one body. You can ensure safety with minimum equipment.With a pull dump feature.

OCT2

Standard inflator valve

Standard inflator with a pull dump feature.

Standard inflator
valve

OCT2

Combines an inflator and octopus in one body. You can ensure safety with minimum equipment.With a pull dump feature.

OCT2

Standard inflator valve

Standard inflator with a pull dump feature.

Standard inflator
valve

OCT2

Combines an inflator and octopus in one body. You can ensure safety with minimum equipment.With a pull dump feature.

OCT2